| |
Basement leakBasements that leak water through the joint where the floor and wall meet after a rain or snow melt (basement corners), the most common wet basements. Most of the wet basements leak water from the walls and the joint where the floor and wall meet, mainly in the corners. Most basements rarely leak water up through the floor. These are created due to the improper construction of the basement. Surface water collects and builds up in a small place around the foundation
that causes hydrostatic pressure. Water is then forced through the corners where the floor and wall meet.
Basement waterproofing
The basement waterproofing has really proved perfect in its functions as its main purpose to protect the basements from leakage. Basement waterproofing begins outside the home and comes along the corners. Corners are to be checked that contribute to the collection of water next to the foundation. Gaps are to be avoided so water flows away from the foundation. Gutters are to be checked for debris and downspouts are to be extended at least 8 feet from the house. Water going inside to the basement corners is to be adjusted to flow away from the foundation.
To cure a new concrete slab
If water evaporation is slowed down, the key to a denser and stronger concrete. Any sealing material can be used on freshly poured concrete slabs as a curing sealer instead of water misting or temporary sealers. It slows down water evaporation by plugging up the pores in concrete. Unlike wax or chemical sealers, it leaves the surface suitable for painting or tile adhesive. As concrete cures, it inevitably develops capillaries. Allow the concrete to cure for at least 28 days and then, deep-seal the slab and walls with any sealing material in 2 applications. This seals the concrete against water, vapor, and radon, bonds and strengthens the concrete.
In case of concrete block walls, let the mortar cure for at least 14 days before applying any sealing material. Any visible cracks in the concrete are to be checked for leaks, the floor-to-wall joints, expansion control joints in the floor, and all penetrations.
The last is the test for moisture transmission through the concrete: So, place a foot-square of plastic or aluminum foil on the floor or wall, seal the edges with duct tape, and check after a couple of days for drops of water.
Water in Basement
A flood in the area can cause a great deal of water to collect in the basement. This can turn out into a bad situation, as the water has no place to go and cannot dry up easily. The only way out is to pump out the water using special equipment....
Basement sump pump
The annoyance of water seems to have a simple solution and this is done by the purchase of a sump pump from a local hardware shop. Normally basement water comes from two locations. One main source is called the cover area and water can come through...
Replacement Basement Window
Windows can make a big difference to a basement. The natural light and heat received through the window can make a big difference to the space and look and feel of the basement. Generally smaller in size than the normal windows that houses have,...
Basement Framing
Basement framing is required to give a neat and uniform look to the basement. It is also considered important because framing and insulating the basement enables the space to be used as a living area and also for storage of stuff. An extension of...
Basement remodeling
Why remodel an existing basement? Basements are like an extension of the house, just that they are beneath the house and not attached to it. Depending upon the room or the set of rooms it has, it is ideal that it more or less resembles the...
|
|
|
|
|
