| |
Basement wallsFoundation walls should be checked for water leakage and sealed before for doing the interiors of the basement. The walls need to be insulated when insulating a conditional basement.
Aluminum poured wall system
In this system the configuration can be accurately determined for corner and angles. There are special pouring machines that allow pouring from one designated spot to another. In aluminum poured wall system rods are not required to hold the
walls together.
Wood Form Wall System
Wood form wall system is less expensive compared to aluminum wall system. In this system rods are used to hold the walls together and when they are removed the holes in the walls have to be filled with liquid cement. Compared to the aluminum wall system dealing with brick ledge difficulties are easier in wood form wall system. The wood wall system in 7ft 10inches, 8ft 10 inches forms.
Styrofoam Wall System
Styrofoam wall system basement is expensive compared to wood form or aluminum system. But they are unique. Styrofoam system resists moisture and helps to keep your basement warm and dry. The slotted edges on the long sides of the board can accommodate wood nailing strips for attaching the boards to the wall. It also provides a nail base for dry wall avoiding costly framing.
Basement wall designs
The basement walls are designed for different types and different material depending upon the site conditions and the client's budget and requirements. The designed basement walls are plain concrete, concrete reinforced walls; masonry reinforced walls and insulated concrete form walls. These designs are easy to construct and are strong and durable.
Insulating basement walls
Basement walls can be insulated. Prior to that the leaks have to be sealed, band joist should be caulked and sealed to prevent air infiltration at the construction joints and around plumbing and electrical lines and dry vents. Three basic options to insulate the walls are
1. Constructing stud frames at the interior of the foundation walls and the filling the cavities with fiberglass insulation.
2. Installing basement blanket to add resale value without sacrificing space to construct framing.
3. You can use basement wall finishing system that requires no additional paneling.
Basement window
Basement windows are generally smaller in size than the normal windows that houses have. They are specifically designed to let in natural light, air and also serve as an emergency exit. Insulated windows with sliding sash or regular single units and...
Basement Renovations
A basement can be a luxurious addition to a home in terms of living space. An extension of the house, it can be used as a room for entertaining and recreation or even a bedroom. The more enterprising people can think of using it as a business office...
Basement
A basement is a room or even an entire floor with many rooms that is either completely or partially situated below the ground floor of the house above it. A basement may be used for many purposes. Many houses, which have basements, may have the...
Basement Insulation
The basement is the first area to be affected by a flood and also the most difficult one to clean up after a flood. Insulation systems for the basement must be able to dry the basement after the flood and maintain the temperature to enable family...
Basement Concrete Foundation Repair and Maintenance
Basement foundation damage can be caused by building on expansive clay, improperly compacted fill soils or due to improper maintenance around foundations. The settlement can destroy the structures and also render them unsafe. Therefore if there are...
|
|
|
|
|
